Easy Handling Rock Crusher Small Hammer Mill

We are involved in manufacturing, exporting and supplying a quality range of Easy Handling Rock Crusher Small Hammer Mill in Ganzhou, Jiangxi, China.

This machine was assembled to supply, when customer received this machine shall check in case of some defect.

1.This machine is amounted to cement concrete basis, shall consider about discharging position when arrange the basis.

2.In order to avoid vibrating cause the effect with building or else, shall fix with hard plate or any vibration-absorptive material.

3.Motor and rotor shaft central shall keep straight in case of sleeve damage and heat.

4.The rotating part is on the right, the position can be adjust as requirement. Preparation before start of Low price easy handling rock crusher small hammer mill.

1.Check if proper lubricating oil inside bearing.

2.Check if all fasten part is tight.

3.Check if there is metal or crushing-difficult materials inside machine body.

4.Check if internal between hammer and bar grate is normal.

5.Rotate rotor by hand to watch its condition.

Usage and maintenance of Low price easy handling rock crusher small hammer mill


1.Feeding materials after machine in right operation.

2.Average feeding avoid workload increasing suddenly.

3.Check bar grate regularly, if any block clean it immediately.

4.Bearing temperature is in 35 degree when working, if over 70 degree shall stop in time to solve.