Ec Meter Conductivity Tester

We take pleasure to introduce ourselves as one of the renowned Exporter, Manufacturer & Supplier of EC Meter Conductivity Tester in Changzhou, Jiangsu, China.
SPECIFICATIONS
Range: 0~9990us/cm
Resolution: 1us/cm(0~999us/cm) 10 us/cm(1000~9990us/cm)
Accuracyi A 2% Full Scale
OPERATING INSTRUCTIONS
1. Remove the protective cap.
2. Press the ON/OFF button once out of the water. The tester will read a 000a .
3. Immerse the tester into the water no more than 2 inches.
4. Wait for the display to stabilize. The tester automatically compensates for temperatures variations. Once the readout stabilizes (10-30seconds), press the HOLD button to view out of the water.
5. Press the ON/OFF button again to turn off the tester. The tester will shut off automatically after 10 minutes of non-use.
6. After usage, shake off the water from your tester or wipe it with a tissue.
Note: If the tester displays a flashinga X10a icon, multiply the reading by 10.
Important: Do not drop the entire tester in the water or dip beyond the maximum 2a level. This product is not waterproof. Tester is not meant to be used in hot water.
Calibration: your meter has been factory calibrated to 500us/cm, which is suitable for most applications. Re-calibration may be necessary from time-to time, depending on usage.
Maintenance
If the meter cannot be switched on or the display fades, please replace the batteries. Please pay attention to the polarity of battery.