Ph Tds Meter

We are a unique name in the industry as a leading Exporter, Manufacturer & Supplier of PH TDS Meter in Guangzhou, Guangdong, China.
SPECIFICATIONS
Range: 0~9990ppm (mg/L)
Accuracyi A 2%F.S
Calibrationi Factory Calibrated
Temperature Compensation: Automatic
Operating Temperature: 0~50a
Power sourcei 2A 1.5v(button cell)
size: 142X 25X15mm
weight: 36g
OPERATING INSTRUCTIONS
1.remove the protective cap.
2.press the ON/OFF button once out of the water. The tester will read a 000a
3. Immerse the tester into the water no more than 2 inches.
4.wait for the display to stabilize. The tester automatically compensates for temperatures variations. Once the readout stabilizes(10-30seconds), press the HOLD button to view out of the water.
5.press the ON/OFF button again to turn off the tester. The tester will shut off automatically after 10 minutes of non-use.
6.after usage, shake off the water from your tester or wipe it with a tissue.
Note: If the tester displays a flashinga X10a icon, multiply the reading by 10.
Important: do not drop the entire tester in the water or dip beyond the maximum 2a level. This product is not waterproof. Tester is not meant to used in hot water.
Calibration: your meter has been factory calibrated to324ppm,which is suitable for most applications. Re-calibration may be necessary from time-to time, depending on usage.