Electro Permanent Magnetic Telescopic Plate Handling System

Electro Permanent Magnetic Telescopic Plate Handling System suspended from Telescopic length spreader beam so that the maximum range of plates are covered.

Features:
* Optimise the available work area by elimination of dunnage.
* One set of EPM placed on the fixed part of the spreader beam and another set placed on the telescopic part.
* The length of the system can be adjusted depending on the length of the plate being handled.
o Shorter plates: activate only the inner magnets.
o Medium plates: activate all the magnets with the telescopic arm in the closed position.
o Long plates: activate all the magnets with the telescopic arm in the expanded position. Electronic control panel along with standby PCB card.
* Double Mag Cycle - this ensures the safe lifting of the load.
* Power Control a Magnetic Power can be varied in 4 steps.
* Safety Interlock Key a to Magnetize/ Demagnetize 2 buttons are to be pressed simultaneously. This eliminates the chance of accidental operation of the magnet.
* a Inchinga feature a When the magnet is switched ON, it might lift more than a single plate. Inching is a feature, which when invoked reduces the magnetic power slowly such that additional plates, if lifted, are dropped. This is used to make sure that only one plate is handled at a time.
* ADPREM a Accidental Demagnetization Prevention Mechanism. Disable the demagnetization cycle when carrying load.