Embroidery Backing Paper Machine By Akshar Industries

Procedure :-
1. Start the machine as follows: Cylinder-tooth roller-section
Fansoften machine-dryer-slash box.

Note: The carding machine should be kept running for half hour after turn-off all
The other machine.

2. Before setting up the line, put the evenly blended pulp into slash box for finishing machine. Sets the finishing roller pressure and ask one worker keeping in watch of web, then sets the first
Team pressure to 3Mpa and second the third teams to 3.5Mpa. Ready for
Production.

3. In the beginning, the cotton is feeded by worker into feeder, then the cotton goes through soften machine, iron catcher, later on sucks into cotton basket by suction fan, then carding machine, web-former, web-dryer, conducted to slash box by worker, finally the web will be flattened and dried by dryer. After all these steps, then we get the end product.

Raw material*
1. Water
2. Regenerative cotton
3. Starch glue
4. Calcium powder

Parameters
1. Net width: 80cm, 220cm
2. Product Weight: 18-120GSM
3. Capacity: Above 60kg/h
4. Mechanical speed: 900m/h---1800m/h
5. Product quality: With a cross and machine