Epoxy Ab Resin Glue For Surfboard Coating

We are famous manufacturer, suppliers and exporters of Epoxy AB Resin Glue For Surfboard Coating in Shenzhen, Guangdong, China.
Feature
Epoxy resin 2120AB-1 can be cured under normal temperature and low temperature, with high hardness, low viscosity, natural defoaming, anti-UV, high transprancy, bright in surface, it can be cured at room temperature or high temperature. ..

Application
2120AB-1 can be widely used for surfboard coating, carbon fiber products coating, snowboard coating, lamp potting and mould filling, etc..
Operation
1.Weigh A and B glue according to the given weight ratio into the prepared cleaned container, fully mixed the mixture again the container wall by clockwise, place it along for 3 to 5 minutes, and then it can be used.
2.Take the glue according to the usable time and dosage of mixture to avoid wasting. When the temperature is below 15 a , please heat A glue to 30 a first and then mix it to the B glue (A glue will be thicken in low temperature ); The glue must be sealed lid after use to avoid rejection caused by moisture absorption.
3.When the relative humidity is higher than 85%, the surface of the cured mixture will absorb moisture in the air, and form a layer of white mist in the surface, so when the relative humidity is higher than 85%, is not suitable for room temperature curing, suggest to use the heat curing.