Eco-friendly Fibers For Construction - 12mm

CPP12 are Polypropylene (PP) fibers of 12 mm length. These micro fibers prevent crack formation and provide reinforcement. They are mainly used in mortar where thickness of plaster is 10 mm or more. They are suitable for waterproofing or repair of structures. They are also used in concrete, where mixing is manual. Suitable care has been taken to ensure dispersion of fibers in the mix.It conforms to ASTM C 1116/C 1116M a 10a 4.1.3 Type III & BS EN 14889-2:2006.

DOSAGE
Minimum Dosage:-For concrete-600gm/m3.For mortar- 900gm/ m3.
For Fire Protection of Concrete:- 1.0 Kg/m3 (min.).Results improve with higher dosage of fiber. Kindly optimize the dosagedepending on the requirement.

HOW TO USE?
For Machine mixing:-Small quantityof water is dosed in empty drum to clean thedrum after each batch. Add fibre in the rotating drum.Then add the chips/sand/cement/water in the concrete mixer and continuenormal operation.
For Manual Mixing:- The fibersare dosed in a bucket half filled with water. The water in stirred vigorously, which disperses the fibers. The water and fiber mixture is spread over the other cementatious mix.
For dosing in Ready Mix Truck:- Add fibres in small lots in the rotating drum. After dosing is complete allow extra 20-30 revolutions ofdrum at maximum RPM.


SPECIFICATION

Material :100% virgin Polypropylene (PP)

Length : 12.0 +/- 0.25mm

Diameter:24 micron (approx.)

Aspect ratio:500 (approx.)

Melt Point:162OC

Specific Gravity:0.91

Thermal &Electric :Low
Conductivity

Alkali Resistance :100% Alkali
Proof

Acid & Salt Resistance:High