Silica Fume By Xetex Industries Private Limited

CETEX MICRO SILICA is a super pozzolan - a finely powdered material, containing amorphous (reactive) silica, when added to wet concrete mix, it results in better quality and durability and it gives higher strength. It complies with ASTM C1240 & IS 15388.

ADVANTAGES
i Higher compressive strength by 10-25 %
i Reduces the rate of carbonation a increases the durability.
i Lower permeability a resistance to penetration of water, chloride & other chemicals
i Lower free lime formation - delays ettringite and thaumasite formation
i Controls bleeding in fresh concrete
i Lower Heat of Hydration, which prevents formation of cracks.

PROPERTIES
Appearance Very Fine Powder
Colour Dark Grey
Odour Odourless
Mean Particle Size 25 microns
Retention of 325 meshBelow 5% (w/w)
SiO2 a Silica89 % minimum
Humidity 1 % maximum
Loss on Ignition at 800A C 4 % maximum

HOW IT WORKS
1. Pozzolonic Effect : When water is added to cement, hydration occurs as shown below:
Ordinary Portland Cement (OPC) + H2O a CSH (Calcium silicate hydrate) + Ca(OH)2(Free lime)
The free lime does not contribute to strength of concrete. When combined with carbon dioxide, it forms a soluble salt, which leaches through the concrete causing efflorescence and wear & tear of concrete, a familiar problem. This makes the concrete more vulnerable to chemical attack and deterioration. When CETEX Micro Silica is added, the following reaction takes place:
Ca(OH)2 + SiO2 a H2O + CSH
This reaction reduces the amount of calcium hydroxide (free lime) in the concrete.

2. Micro Filler Effect : It is an extremely fine material, with an average diameter much finer than the cement. It gets well distributed in the wet concrete paste, thus blocking the bleed-water channels. It also results in better compaction and thereby higher strength.

PACKING
CETEX MICRO SILICA is available in 25 kg Plastic bag or Jumbo Bag.