Ft232 Usb To Rs232 And Ttl Converter

Following are the Main Features of FT232 USB To RS232 And TTL Converter :-
Based on FTDI FT232RL
Provides UART output for 8 serial signals (TX, RX, RTS, CTS, DCD, DSR, DTR)
Jumper select-able 3.3v or 5v UART output
TX/RX activity LED indicators
3-wire (TX, RX, GND) RS232 output from DB9 Male connector
RS232 RTS & CTS output solder pads if required.
500 mA/6V Resettable Fuse to prevent your PC/Laptop's USB Port in case of any short-circuit condition.
High-Quality PCB
FT232 Specifications:
Implements full v2.0 USB protocol
Royalty-Free Driver support for Windows, Linux, and Mac OSX
Data transfer rates from 300 baud to 3 Mbaud (RS422, RS485, RS232 ) at TTL levels
UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd/even /mark/space/no parity
FIFO receive and transmit buffers for high data throughput
In-built support for event characters and line break condition
128 byte receive buffer and 256 byte transmit buffer utilising buffer smoothing technology to allow for high data throughput
Adjustable receive buffer timeout
Synchronous and Asynchronous bit bang mode interface options with RD# and WR# strobes
Integrated 1024 Bit internal EEPROM for storing USB VID, PID, serial number and product description strings, and CBUS I/O configuration
Device supplied pre-programmed with unique USB serial number
Support for USB suspend and resume
Integrated 3.3V level converter for USB I/O
Configurable I/O pin output drive strength
UART signal inversion option