Fusion Splicer Pt-300t

Specification of Fusion Splicer Pt-300T :
ModelPt-300T
Applicable fibersSM (ITU-T G.652), MM (ITU-T G.651), DS (ITU-T G.653), NZDS (ITU-T G.655)
Fiber cleaved length12~16mmi Coating diameteri 250I mi
16mmi Coating diameter: 250 ~ 1000I mi
Fiber diameterCladding diameteri 80 ~150I m
Coating diameteri 100~ 1000I m
Fiber CountSingle
Fiber aligning methodCore or clad aligning
Image processing methodDigital
Actual average splice loss 0.02dB i SMi , 0.01dB (MM),
0.04dB (DS), 0.04dB( NZDS)
Splicing timeTypical 9 seci with standard SM fiber
Splicing mode 53(templet), 40(user)
Splice loss estimateMore accurate
Return lossi 60dB
Storage of splice result4000 resultsi 20 parameter per result
Fiber display and magnification300Xi X or Y viewi ,150Xi X and Y viewi
Tube heating timeTypical 30 sec
Tube heating mode9(templet), 24(user)
Tube heating temperatureCan be adjusted
Applicable Protection sleeve length60mm, 40mm and a series of micro sleeves
Tension test2N
Electrode life2500
No.of splice/heating with batteryTypical 150 cycles (splice/tube heat) with inner Li-battery
Display screen5.6 TFT inch color LCD monitor
Image change overThe fiber image is turned upside down
TerminalsUSB 1.1 and VGA
Operating condition0 ~ 5000m above sea level, 0 ~ 95%RH and -10i 50a , respectively, Max. wind velocity of 15m/s
Power supplyAC 100-240V with AC adapter; inner Li-battery(6600mAH)
Dimensions150mm(L) x150mm (W) x150mm (H)
Weight2.7 Kg excluding battery,3.2 Kg including battery