General Tile Adhesive

We are engaged in manufacturing, exporting, distributing and supplying excellent quality General Tile Adhesive to our valuable clients.

Features:
1, A new type strong stone adhesive, applied to all kinds of ceramic tile and stone material.
2, No need to wet the brick wall, effectively improve the efficiency.
3, Strong bond ability, material-saving, much safer and firmer than the traditional cement adhesive, also can reduce the construct trash and the weight of the wall.
4, Good anti-infiltration and anti-aging function.
5, Can be directly used for leveling rough surface, or smooth cement floor.

Surface Treatment:
The substrate surface should be firm, dry and clean, no grease, no wax, or other loose materials.

Operation Process:
1, The ratio:PB-01: water=3.3: 1 (20kg/bag, about 6kg water). Stirring them into uniform paste, using an electric mixer can gain a best effect. Put it aside for a few minutes and then a little stirring to enhanced strength.
2, Using a tooth scraper to scrap the adhesive onto the surface evenly, control within 1a , then push the ceramic tile above it.
3, For the tile or stone material with deep ditch, not only scrape the surface, but also the backside of the tile or stone.
4, Leave 1.5mm joint space between two tiles, suggesting PB-MC Color Mould-resistant Grout.

Cautions:
1, Make sure the smoothness and vertical rate of the surface before operation.
2, Can not be walked on or filled the crack unless 24h after finished.