Polishing Skim Coat

We are engaged in manufacturing, exporting, distributing and supplying excellent quality Polishing Skim Coat to our valuable clients.
Features:
PB-09 Polishing Skim Coat is a thin coating skim coat, strong anti-crack function, can be inserted on other outer wall skim coat directly, and make the surface smooth and closed, reducing the amount of base coat or painting (especially the F-C paint).
1, Waterborne single skim coat: white paste, can be used directly, waterborne acrylic is the main component.
2, Oily two-component skim coat: includes main agent and curing agent and the ratio is 20: 1, mixing them before using.
Note: the mixed skim coat should be used up within 4h.

Surface Treatment:
1, The substrate surface should be firm, dry and clean, no grease, no curing agent, no release agent and no inserting marks.
2, Smoothness i 2mm.

Operation Process:
1, Using a trowel to scrape the mixed polishing skim coat on the surface (requiring one or two times).
2, Polishing with a piece of sandpaper 8h later.
Tips:
a, Mixing the PB-09 with water into paste, an electric mixer can get better effect, put it aside for a few minutes and then a little stirring to strengthen the strength.
b, Using an appropriate scraper to scrape the skim coat on the surface.

Normal Amount: About 0.15~0.2kg/a .

Cautions:
1, Make sure the smoothness and vertical rate of the surface before operation.
2, Never mix the dry slurry with water for second use.