Glass Coat Dyes

Glass Coat DyesPRODUCT DATA SHEETProduct Name: Tansy Care Daye stuff Solution Light YellowProduct Code    :  (DX00.3005)DescriptionSolution of organic dyes in true solvents.Compatible with all types of resin systems like P.U.,Epoxy,T.S.A, Polyester etc.  and provides transparent colour with good light fastness.  (ROHS complies)Recommended useThis product is  intended for use  as a colorant to get transparent colour with for PU ,TSA, Epoxy  clears.  Due to excellent compatibility with all  Tansy Care Systems  it also enhances flow & leveling , gloss and performance of coloured transparent coating. It can be used to achieve flambouyantfinishes  Top Coat Clear on Base Coat Metallic Finishes.AdvantagesProvide  transparentcolour with good light fastness.Excellent compatibility with plated surfaces. (reduce patch formation)Typical Properties Property                                                                                               Value                                                                    Specific Gravity                                                                         0.87+0.02                                       Solids by volume                                                                       10 + 1% intake                                                                                    1-15(or as per requirements)Surface PreparationThe surface should be clean, dry and free from oil, grease, dirt,& other foreign contamination. The surface should be assessed and treated in accordance with ISO 8504.   For coating direct on  metals, ultra sonic cleaning is recommended.Clean the surface thoroughly  with suitable cleaner to remove  oil, grease, and dirtApplication InstructionsFor 2k system:1. Take measured Volume of clear lacquer (Part-A) in  clean container and add  dyestuff solution under stirring condition and mix well until uniform solution is achieved . Then add Part -B in recommended  ratio with Part -A. Exclude the volume of dyestuff solution added.2.Dilute  above solution with Compatible Thinner. Set  application viscosity 18-22sec.3.Filter with suitable  nylon filter cloth4.Ensure the surface is free from foreign contaminations.5.Set air pressure  at 40-50 psi6.Spray to obtain a DFT of 30- 35 microns7.Before Oven drying provide 5-8 min flash off time @ 25-35oC in dust free zone.For 1-K system:1.Take measured volume of Clear lacquer  in  clean container and add   dyestuff solution under stirring condition and mix well until uniform solution is achieved. 2.Dilute  above solution with Compatible Thinner. Set  application viscosity 18-22sec.3 Filter with suitable  nylon filter cloth4.Ensure the surface is free from foreign contaminations.5.Set air pressure  at 40-50 psi6.Spray to obtain a DFT of 30 - 35 microns7.Before Oven drying provide 5-8 min flash off time @ 25-35oC in dust free zone. Storage : Store containers in a dry, cool, well ventilated space and away from source of heat and fire.Loose containers must be kept tightly closed.Packing : 0.10 ltr, 1.0 ltr