High Grade Graphite Electrode By Shanghai Wanzun Metal Science Co., Ltd

As an acclaimed enterprise involved in manufacturing, exporting and supplying High Grade Graphite Electrode in Shanghai, China.

Physical and chemical index :
ItemUnitRegular power(RP)Impregnated(IP)High power(HP)Ultra high power(UHP)
I 250-400I 450-600I 250-400I 450-500I 550-600I 250-400I 450-600I 250-400I 450-500
Bulk Density (a Y)Electrodeg/cm31.551.541.641.641.621.661.661.681.68
Nipple1.701.701.721.721.721.741.741.781.76
Specific Resistance(a )ElectrodeI ICA.m8.28.87.07.37.66.26.55.76.0
Nipple5.55.55.05.05.04.74.74.04.0
Bending Strength (a Y)ElectrodeMpa8.27.010.010.010.011.011.012.012.0
Nipple18.018.019.019.019.020.020.021.021.0
Elastic Modulus (a )ElectrodeGpa9.39.312.012.012.012.012.014.014.0
Nipple14.014.016.016.016.016.016.018.018.0
C.T.E.(a )
(100-600A C)Electrode10-6/A C2.52.42.32.32.22.02.01.71.7
Nipple2.02.01.81.81.81.61.61.31.3
Ash(a )Electrode%0.30.30.30.30.30.30.30.30.3
Nipple


Recommended current carrying capacity:
Nominal
diameter(mm)The allowable current intensity
Regular power(RP)Impregnated(IP)High power(HP)Ultra high power(UHP)
2507000-100008000-120008000-13000
30010000-1300011000-1600013000-1740015000-22000
35013500-1800015000-2200017400-2400020000-30000
40018000-2350020000-2800021000-3100025000-40000
45022000-2700024000-3400025000-4000032000-45000
50025000-3200028000-4200030000-4800043000-55000
60035000-4100040000-45000
A wide range of graphite electrode dimensions and grades can be supplied to improve your furnace performance and reduce the steel melting cost.


Our suggestion about the selection of graphite electrode:
Capacity of furnaceEAF furnaceLF furnace
5 ton250RP
10 ton350HP250RP
20 ton400HP300HP
30 ton450HP350HP
50 ton500UHP350HP
75 ton550UHP350UHP
100 ton600UHP450UHP
150 ton700UHP450UHP
The above collocated furnace type could be changed based on many factors, such as the current volume, transformer power, ect.


Our suggestions:
1.Before connect the electrode:
A. Please check the inner thread of the electrode first. If the thread is not intact, please contact the sales staff to confirm whether the electrode could work properly.
B. Please clean the electrodes by compressed air first before connecting.
C. When the electrode is being wrung into the electrode hole on one end, the cushion could be prepared on the other end to avoid the nipple breakage.

2.When connecting the electrodes:
1). Drop down slowly, when the new electrode is right above the hole of the connected electrode.
2). Put the isolator between the two electrodes, and drop the electrode slowly to prevent the breakage of electrode hole and nipple threads.
3). Lift the new electrode a little, and then take out the isolator, connect the two electrodes.
4). Tighten the electrodes with the proper wrench and specified torque.

FAQ:

1. What's the advantages of your graphite electrode:
1) Extruded graphite electrode,produced by 12,500MT extruder
2) Long working life,bear harsh conditons easily
3) Good electrical conductivity
4) High resistance to thermal shock
5) High mechanical strength
6) Smooth finish
7) Easier to use and maintain.
8). Fash response on after-service.

2. What's the MOQ?
1Mt.

3. Is your company accept customization?
Yes.

4. Do you provide samples?
Yes, samples are free.The express cost is on customer's account.

5.What about the lead time for mass product?
Based on the quantity,about 7-9days.For graphite product,apply Dual-use items license need about 15-20working days.

6.What is your terms of delivery?
FOB, CIF, CFR

7. How to control quality?
Material,Production and inspection,under NEMA CG 1/ IEC 60239 / JIS R7201, YB/T 4090-2015 standards etc.

8.Product packaging?
Wooden, or according to your requirements.

9. Where your products covered?
Russia, Iran, Vietnam, India etc.