High Temperature Epoxy Stick

HIGH TEMP  EPOXY STICK  Q-250      UNDER  FLOW INSTANT ON-LINE  HIGH TEMP OIL LEAK REPAIR PUTTY   Q-250  is a versatile unique   hand knead able  instant action epoxy  putty Of  American origin, for repairs of almost all types of hot oil leaks up to  250 Deg c  from  pipe line or equipments made of ferrous /non ferrous materials As well as PVC  plastics, wood , Aluminium, Fiberglass, ceramics and cement Concrete or Glass.   Q-250  is most reliable epoxy putty for repairs of wet  and oily  areas for Stopping  oil  leaks under flow condition,  on-line  without  shut down for the Pipelines carrying  not only  oil but also  vast range of hydrocarbons.   Q-250  comes  in  2 Oz / 57  gms  90 mm long  single epoxy stick form with resin and hardener in same  stick. One  has simply to cut, knead and apply.   There is nothing to Weigh  or measure.        Q-250   epoxy  has   100 %  solid  contents.  It  does not Shrink or gets  de colorized  when  exposed to UV radiation.  After  just 4 hour full cure, Cured    Epoxy Is fully machinable .  It  can  be   cut,  sawed,  drilled,  tapped,  and   turned on Lathe,  or   machined on milling machine .It can be sanded and painted .                                                                                                                        PERFORMANCE   DATA   1.      Working  life                                       3-7 minutes 2.      Shelf life                                             3 years  plus 3.      Full cure                                             24 hours 4.     Pressure tested to                               1300 psi    ASTM  D 1002 5.     Temp. Limit                                         250  deg c  cont. 6      Density                                                1.9 g/cc 7.     Tensile strength                                   6000 psi 8.     Compressive strength                         18000 psi 9.     Shore hardness                                    D 85 10.   Dielectric strength                               400 volts/mil  @0.125 inch   Q-250  IS CERTIFIED BY NSF . IT IS CERTIFIED TO ANSI/NSF 61-G .