Hydraulic Bending Machine By Hebei Yanshan Fengliyuan Pipe Fittings Equipment Manufacture Co.,ltd.

We are engaged in producing of Hydraulic Bending Machine with the following details:
1 The oil cylinder:IDA A 200mm,the rod inside: A A 160mm A A A the effective trip: 4.m, pressure A 21Mpa,2 bars
The maximum thrust of the 2 cylinders:130 tons; The forward speed: 0AcA A 120cm/min ,
The max backward speed 450cm/min.
2 The pump station
63scy-plunger pump :1 set, 18.5KW Motor: 1set (the main working pump)
CB-63 gear pump 1 set,11kw motor 1 set.
The hydraulic valve is integrated oil rout,hydraulic back fork gate. Manual feeding.
3. The frame for the main engine: 20# channel steel, welded with 24kg steel rail
4 The panel for the main engine: welded with 18-20mm medium sheet
5 Distribution cabinets, operation box 1 set
6 Intermediate-frequency power (power 400KW 380vA A 220vA A 50Hz)
The scope of supply
A. frame for the main engine: 1 piece, hydraulic pump station: 1 set,
distribution box 1set, front and back fork door: 1 block each .
B. Intermediate-frequency electric ark 1 piece, reactor, capacitorA 1 set,
C. water cableA 2 (L=2500mm) A A A heating induction coilsA 1 piece.

The purchaser should prepare
a. power, wire and cable connecting the equipment
b. terra screws, cement floor
c. water cooling section (pool, water pump, water pipes, etc.)
d. hydraulic oil,the mandrel,the reshaping equipment.
After-sales service