Cheap Universal Fan Coil Unit Ceiling Floor Fan Coil Unit Under Ceiling And Ceiling Suspending Fcu 2 Pipe & 4 Pipe

Preview
(1) Cabinet is made of ABS plastic and front galvanized steel
(2) 2pipe 3rows, 2pipe 4rows, and 4pipe 3+1rows are available
(3) Pipe connection can be changed at site (from left connection changed to right connection), this helps to save stock cost
(4) 2 Pipe unit can be changed into 4 pipe unit at site
(5) The decorative unit can be changed to concealed type by removing the cabinet

Features
(1) Multiple functions:
Pipe connection can be changed at site If you have left pipe connection unit in stock, and if your customers wants Right connection unit, you can remove out the coil from the unit and put back oppositely as above sketch A
2 Pipe unit can be changed into 4 pipe unit at site. If you have 2 pipe unit in stock, then you can mount one additional hot water coil onto the main cooling coil, then it will become 4 pipe unit as above sketch B
Remove the cabinet (4 screws on the top and 2 screws at the bottom) ,then the unit will become without concealed type. sketch C
(2) Casing is made of ABS plastic and front galvanized steel; Top grill is has fixed louvers and is reversible in order to distribute the air in two different directions; No screws to fix the grills which makes it is easy to remove the grills from the unit; Hidden boxes are reserved at left and right side of cabinet for thermostat installation
(3) The water coil adopts OD9.52mm seamless copper tube and blue fin expanded together, coil is tested in factory performance test lab under 2.8MPa to guarantee the performance;
(4) Adopt single phase three speed capacitance type motor, and the fan blower adopt forward curved blades centrifugal galvanized steel fan blower which is dynamic and static balance tested;
(5) The external drain tray is general used for vertical or horizontal installation which makes stock more easier and more saving.
(6) High quality brass coil header, bleeding valve is factory built in on each header, and the protect mounting bracket is factory installed as standard to protect header not easily to be damaged during tube connection to the header.