Kanglida Orthopedic Splint For Wrist, Knee, Arm, Leg, Foot, Elbow

Backed by a team of diligent experts, we have been able to manufacture, export and supply a wide range of Kanglida Orthopedic Splint For Wrist, Knee, Arm, Leg, Foot, Elbow in Jining, Shandong, China.

Klida orthopedic splint is composed by manifold layers of orthopedic casting tapes and specially non woven fabrics. It is characterized by better viscosity, fast drying time, high rigidness after dying and light weight. Due to better bio compatibility, polyurethane is widely used in medical places. Animal study and acute and chronic toxicity test have proved that medical polyurethane was non-toxic and no-induced distortion, no local irritation and no allergic reaction.

Specification

A.Fiberglass Material
modelsizepacking
KSF 3127.5CM X 30 CM20bags * 6boxes/ctn
KSF 3357.5CM X 90 CM10 bags * 6boxes/ctn
KSF 41510.0CM X 40 CM15 bags * 6boxes/ctn
KSF 43010.0CM X 75 CM10 bags * 6boxes/ctn
KSF 53012.5CM X 75 CM10 bags * 6boxes/ctn
KSF 54512.5CM X115 CM5 bags * 6boxes/ctn
KSF 63015.0CM X 75 CM10 bags * 6boxes/ctn
KSF 64515.0CM X 115 CM5 bags * 6boxes/ctn

B.Polyester Material
modelsizepacking
KSP3127.5CM X 30 CM20bags * 6boxes/ctn
KSP 3357.5CM X 90 CM10 bags * 6boxes/ctn
KSP 41510.0CM X 40 CM15 bags * 6boxes/ctn
KSP 43010.0CM X 75 CM10 bags * 6boxes/ctn
KSP 53012.5CM X 75 CM10 bags * 6boxes/ctn
KSP 54512.5CM X115 CM5 bags * 6boxes/ctn
KSP63015.0CM X 75 CM10 bags * 6boxes/ctn
KSP 64515.0CM X 115 CM5 bags * 6boxes/ctn

Package
1pc/bag, 5bags/box, 6boxes/carton
1pc/bag, 10bags/box, 6boxes/carton
1pc/bag, 15bags/box, 6boxes/carton
1pc/bag, 20bags/box, 6boxes/carton

How to use splint:
1) Select proper specification according to the surgery position
2) Put the pad (cotton coil or cotton slipcover) on the surgery position.
3) Immerse the roll in room temperature water(21-24A C) for 4-6 seconds and squeeze it 2-3 times firmly. If the water warmer than 21-24A C shortens the immersing time, while cooler than 21-24A C water lengthens the time.
4)Take the splint out and press out excrescent water;Absorb water drip of the splint surface with towel.
5) Put the splint on the fixed position, molding it according to need. Mold it in 3-5 minutes after immersing in water because after that time it will concretion. Allow about 10 minutes for sufficient concretion and let patients not move during this time. It could bear electric weight after 20 minutes.
6) Fix the splint with gauze bandage or elastic bandage after concretion.