Liquid Sealer By Xetex Industries Private Limited

CETEX Liquid Sealer (LS) is the mixture of small molecules of silane and siloxane, which forms micro-emulsion when mixed with water. It is safer, faster and easier to apply. Treated surfaces resist liquid penetration without significantly reducing breath-ability of the surface.

MECHANISM
On application of diluted solution, it reacts with air to form active resins in pores, which prevent penetration of liquid.

ADVANTAGES
Can be diluted in water up to 10-20 times.
Can be applied on coated or uncoated surfaces.
Provides water repellency within 24 hours.
Treated surface is breathable. It is UV stable.
VOC content is nil, helps earning LEED points as green building.
Reduces maintenance, and prevents steel corrosion.
Will not yellow, discolour, peel or flake.
Non-flammable. Non-toxic. Low odor.
It cures quickly and is economical to use.

PROPERTIES
Type : 100 % Silane / siloxane
Color : Reddish Orange
Specific Gravity : 1.06 +/- 0.02 at 25oC
Dilutent : Clean soft water

COVERAGE
Diluted solution can be covered over 150 sq. ft/litre (approx.). However, field trials should be conducted to determine the optimum dilution and coverage to achieve the required result.

DIRECTION OF USE
~ Dilute at least 10-20 times with soft water only.
~ Take trial of small quantity to finalise the dilution ratio.
~ Apply by brush, spray or by flooding the surface.
~ Use the diluted mixture within 72 hours.
~ Do not wash the surface for 24 hours after application.
~ Wipe out splashes, if any, by soap water or organic solvent.

PACKING
CETEX-LS is available in 25kg pack. Other pack sizes available on request.

STORAGE
Store in frost-free condition away from sunlight or extreme heat. For best result, use within one year.