Liquid Biomatix Sewage Treatment Plant (Naturevel Ww) Water Chemical

Biomatix Sewage Treatment Plant is a specially formulated micro-organism containing bacteria. When added in waste water treatment system, it starts multiplying immediately to create higher biomass content.

This helps in quick biodegradation of BOD, COD and TSS levels of sewage water. The product is a commercially viable solution for sewage treatment. Biomatix - STP is economical to use. The product can be used for any scale of operation from large sewage treatment plants and smaller plants installed for commercial complexes, hotels and housing colonies etc.

Activation/ Multiplication Procedure-:
Mix 1 litre with 2 Kg molasses/ jaggery and 17 litre of fresh water in a 20 litre jerrycan
Allow it to ferment for 36-48 hrs and check pH daily.
Use once pH drops below 4
Application Procedure-:
Apply 1 litre of activated culture as per ratio 1:1,500 litres of wastewater for about 21 days continuously.
Give a break of about 3 days and dose depending on the results received from lab.
Thereafter, dosage frequency can be reduced or increased depending upon the lab reading as follows:
Area of Application-:
Sequence batch reactor (SBR)
Activated sludge process (ASP)
Moving bed biofilm reactor (MBBR)
Membrane bio reactor (MBR)
Benefits-:
Reduces the running cost of treating sewage water.
Helps to meet CPCB norms more stringently.
Suppresses population of Coliforms
Suppresses foul odour and vector population.
Works in both aerobic and anaerobic STPs comfortably.