Nysp-l863 Radio Frequency Admittance Switch

Specifications and features of NYSP-L863 Radio Frequency Admittance Switch.

Design features: It can be applied to the measurement of various conductive and non-conductive media.
Anti-adhesion: The use of patented anti-adhesion circuit can eliminate false signals caused by material adhesion.
Probe removable: There is no cable connection between the probe and the controller. The controller can be removed, replaced and repaired at any time without affecting the material output.
High and Low Temperature Resistance: Suitable for working environment from minus 184 degrees Celsius to 280 degrees Celsius. Ceramic probe for higher temperature can also be provided.
Output form: double-pole double-throw relay signal output, while the state lamp shows the output state, and from 0 to 30 seconds delay function
Intelligent diagnosis: After power-on, the instrument circuit automatically detects whether the working state is normal.

Typical applications: liquid, powder, particle, solid level control
Probe rod material: 316, ceramics (optional)
Probe length: 500mm (customizable according to requirements)
Power supply: 24VDC, 220VAC (optional)
Process temperature:>+260 Celsius
Process Pressure: <2.0MPa
Process connection: thread and flange (optional)
Time delay: 0-30s adjustable
Loss Protection: Normally Open, Normally Closed, On-site Switchable
Output relay: DPDT output, 5A, 24VDC or 5A, 220VAC
Protection/Explosion Protection Level: IP67/Exia IICT (optional)