Ponovo Pa Series Panel-mounted Power Amplifier For Rtds Dimension(l*w*h): 650*900*2100 Millimeter (Mm)

PONOVO's PA series of amplifiers are specially designed for power network real time simulation applications,which requires large power output,high accuracy even at high current output for all kinds of load.It can be used together with RTDS to compose a complete power network real time dynamic simulation system.


Model: PAC2000B Panel-Mounted Power Amplifier

PAC2000B is a kind of high-performance linear power amplifier specially developed for power system simulation, showing incredible performance of not only solving the accuracy problem for linear power amplifier during high power and high current output but keeping the strength of being available for all kinds of capacitive and inductive loads. It can output high current, with maximum RMS phase current of 200A and maximum output power of 2400 VA, and its step response accuracy and time delay accuracy are very high, which is less than 20A A A A A A A A s.
It can built up 3-phase or 6-phase system together with other PA series amplifier models, which can be installed in a integrated cabinet to finalize different simulation application requirements.

Features:
1 Channels current outputs. The output current of each channel can reach 200A RMS. The maximum output power can reach 2400VA.

Model: PAC60Ci Panel-Mounted Power Amplifier for HIL

PAC60Ci is the 6-phase real time simulation amplifier, with maximum RMS phase current of 30A and maximum output power of 450VA. This current amplifier is possessed of high accuracy and fast liner response. PAC60Ci is specially designed for R&D of power system simulation. It solves the problems of high power of linear power amplifier and accuracy of high current output. It is adapted to various capacitive and inductive load. It can be installed in the cabinet to work together with other amplifier models and equipment to finalize different simulation applications.

Model:
PA30Bi Panel-Mounted Power Amplifier (Hardware in the Loop Simulation)
PA30Bi-H Panel-Mounted Amplifier (Power System Simulation)
PA60Bi Panel-Mounted Power Amplifier (Hardware in the Loop Testing)

PA30Bi is a panel-mounted type real time simulation amplifier. This digital power amplifier can output 3-phase current, with maximum RMS phase current of 30A and maximum output power of 450VA, and 4-phase voltage, with maximum RMS phase voltage of 120V and maximum output power of 60VA.

PA30Bi-H is the panel-mounted type power amplifier model which can produce 3-phase current, with maximum RMS phase current of 30A and maximum output power of 450VA, and 4-phase voltage, with maximum RMS phase voltage of 250V and maximum output power of 75VA. It can be installed in the cabinet together with other amplifier models to consist of complicated simulation system together with RTDS and other equipment for the HIL or PHIL application.

PA60Bi is a panel-mounted power amplifier, which can produce 3-phase current, with maximum RMS phase current of 60A and maximum output power of 800VA, and 4-phase voltage, with maximum RMS phase voltage of 120V and maximum output power of 60VA. This model is similar to PA30Bi but has higher current output and power output. It can compose with other amplifier models to consist comprehensive simulation system to support simulator, like RTDS, OPAL-RT, NI,etc to finalize various simulation experiments.

Model:
PAV250Bi Panel-Mounted Power Amplifier for Network Simulators
PAV120Bi Panel-Mounted Power Amplifier for Real Time Dynamic Simulation