Paste Kettle Vessel

Paste Kettle Vessel

Introduction :


Paste Kettle Vessel Will Be Made Out Of S.S. 304 Rectangular Pipes Of 3
Mm Thk And Will Be An Independent Resting Type Frame Work Where No
Foundation Will Be Required. The Kettle Will Be A Hemispherical Type
Bowl With Either Steam / Oil / Water Heating Jacket Will Be Provded.
The Kettle Will Be Manufactured From 2.5 Mm Thk S.S. 304 Sheet And The
Jacket Will Be Of 2.5 Mm Mild Steel (In Case Of Steam Jacket The
Thickness Will Be 4 Mm) . There Will Be Oil / Water Heated Fitted At
The Back Bottom Side Of The Kettle. The Kettle Will Be Having A Worm
Type Arrangement For Tilting . A Temperature Controller And A Temp
Indicator Will Be Provided For Temp Control And Indication. The Kettle
Will Be Insulated With 50 Mm Thk Glasswool Insulation And Claded With
16 Swg S.S. 304 Sheet. Kettle Will Be Buffed To 150 Grit Matt Finish
Externally And Internally The Kettle Will Be Buffed To 220 Grit Mirror
Finish




Optionals Available :


Built In Stirrer Arrangement With Lifting And Lowering DeviceSteam Fittings With All Connections Factory Fitted Non Tilting Type With Bottom Discharge Models Are Also Available. Capacities Available :

From 10 Ltrs To 2000 Ltrs Capacity.

FUNCTIONS:

Basically This Unit Is Used For Preparation Of Starch Paste.
Hemispherical Shape Ensures That The Heating Of The Starch Paste Is
Uniform And Gets More Surface Area. The Tilting Type Arrangement
Ensures Ease In Unloading The Paste Into Any Container Or Vessel. The
Starch Is Put In The Kettle And Water Is Added Till Desired Thickness
Is Achieved. The Kettle Is Jacketed And Is Heated Till Till The Starch
Melts And A Thick Paste Is Achieved. This Paste Can Be Agitated Either
Manually Or With The Help Of A Anchor Type Agitator Which Will
Constantly Stir The Paste So That There Will No Lumps Formation And
Proper Mixing Is Achieved.

Temperature Can Be Set To Desired Temp By Adjusting The Thermostat
Provided And The Temperature Can Be Seen In The Dial Thermometer
Provided.