Pilot Operated Relief Valve (Yuken)

We are engaged in distributing and supplying a wide range of Pilot Operated Relief Valve (Yuken) in Mumbai, Maharashtra, India. These valves protect the hydraulic system from excessive pressure, and can be used to maintain constant pressure in a hydraulic system. Our organization is considered as one of the emerging names in the industry indulged in providing a broad range of Yuken BG 03, BG 06, BG 10, BT 06 Pilot Operated Relief Valve. Widely used in industry, these offered products are highly accredited in the industry. Together with this, these are rigorously checked by us on a number of grounds before they finally get dispatched to our customers.

Features :
High strength
Robust structure
Hassle free installation


Remote control and unloading are permitted by vent circuit.

Instructions :
*If a remote control relief valve is used in the vent circuit, see page 1 in EIC-C-1001-0. In addition,if the internal volume of the vent line is too large,chattering is likely to occur. Thus, as far as possible reduce the inside Dia. and the length of the pipe.

* To adjust the pressure, loosen the lock nut and turn the handle slowly clockwise for higher pressure or anti-clockwise for lower pressures. One revolution of the handle makes about a 50 Kgf/cm pressure change. After adjustments, do not forget to tighten the lock nut.

* Pressure is limited by collars fitted. If a working pressure cannot be attained, remove some collars. One collar is equivalent to 100 Kgf/cm.

* Piping of the Tank line should not be connected to any tank line of the other valves, but connected directly to the tank.

* With a small flow, the setting pressure may be unstable. Use models numbered 03 and 06 with a flow rate 8 L/min. and model 10 with 15 L/min.

* There are two threaded connection pressure ports. They can be connected each other in-line one as inlet and the other as an outlet or the valve can be used by plugging one of the pressure ports.