Polycarboxylate Ether Powder By Kashyap Industries

Polycarboxylate ether (PCE) is a ready to use high range water reducing concrete admixture emanating from the stateof-the-Art Polycarboxylate technology.

Our Product is new generation superplasticizer containing carboxylic (COOH) group instead of sulphonic (SO3H) as in case of Melamine or Naphthalene Formaldehyde Sulphonate.

Specification:

Appearance : Cream colored Powder
pH value (1:10): 6.5 A 0.5
Solubility : Readily soluble in water
Solid content: Minimum 95.0 %
Bulk density: 0.45 a 0.55 gm/cc
Chloride content: Below 0.02

Advantage:

The advantage of PCE are as below,
High water reducing ability.
Easy to use any cement grade.
Improve concrete setting time.
Produces cohesive and non-segregating concrete mixtures.
Small dosage level.
Low concrete viscosity.
Increase compressive and flexural strength of concrete at all ages.
More than 30 % water reduction in high performance concrete.
Linear water reduction through out the recommended dosage.
Faster recycle of form work owing to accelerated early strength development.
Close textured fair faced smooth concrete.
Rheoplastic self-leveling and self compacting concrete.
Economical concrete design.

Dosage: 0.1 to 0.5 kilograms/100 kilograms cementitious material for most concrete mixes using typical concrete ingredients. However for silica fume
concrete, the dosage may fall outside recommendation and site trials in case of critical workability and setting time parameters as per requisites to fix optimum dosage.