Polyol And Iso Storage And Feeding System (Pms St1500)

Main Technical Parameters:-
* Polyol and ISO container unit,
* Effective volume: 1500L;
* Material: Carbon steel,
* Working pressure max. 0.45Mpa;
* With safety valve;
* Agitator with mechanical sealing coupling;
*With pressure switch compressed air decompressor,
* Non-return valve on the filling port;
* Magnetic liquid level meter: Visual level with alarm sensors
* Heat exchanger: Pipe-type heat exchanger installed outside the tank.
* Temperature probe,
* Double walled structure, temperature insulation out of surface of the tank;
* Double screw reciprocating /feeding pump The flow capacity: 50L/min., Main motor power: 5.5kw
* Water supply required: Processed running water, flow capacity: 300L/min. Brings R1 the ball valve;
* The compressed air supply required (if needs): 0.7 Mpa, flow capacity: 600NL/min. With the 1.0Mpa pressure relief valve and R3/4 the ball valve;
* Power supply required: 3 phase; 380V/50Hz plusmn 10% or as customer's local condition
* Control voltage: AC220V/DC24V;