Printshop Use Hot Melt Adhesive

We are a highly reliable firm, we are engaged in supplying of Printshop Use Hot Melt Adhesive in Shijiazhuang, Hebei, China.

Characteristics:

Good flowability and bonding strengthA
Less odor, less VOCs

Fields Of Application

Binding at both book spine and side, mainly used for letter paper, documents, etc.A

Technical Data:A

Properties A A A A A A A A A A SpecificationsTest MethodsA A A
Main ingredientsEVA resin
ColorWhite
FormGranuleA solid
Softening pointa Y85a GB/T15332-1994
Peeling strengthA a Y55N/2.5cmGB/T2790-1995
Viscosity2200A 500 mPaA.s(180a ) A HG/T3660-1999
Open time7~10 secHG/T3716-2003

Packaging:

25kgs/kraft bag

Application Method:

Service temperature 155A 5a , ambient temperature 17~30a ;
Preheat the glue at least 2h, ensure that the glue melts completely, and use it until reach the target temperature;
Raking depth 1.5mmA 0.5mm, slotting depth 1.5mmA 0.5mm, slotting interval 5.0~7.0mm;

Instructions For Use:

The flowability and setting time changes along with the room temperature of working shop, please adjust the temperature of melting tank and speed of binding machine;
Do not mix with glue from other suppliers;

Suggest to use the glue in season, especially avoid mistaking a summer gluea and a winter gluea ;
Suggested working humidity at RH50%A 10%;
Clean the preheat tank once per season, melting tank once per two weeks;
Books shall be stored at 0~40a , shall not be stored outdoors and heat source.

Shelf Life And Storage Conditions:

Shall be stored in indoor, cool and dry place, avoid direct sunlight and constant high temperature
2 years (sealed)

Remark:

These shown data is based on our knowledge and experience. This also applies to any third party property rights. Customers must check that the products are suitable for their processes and usage.