Ready Mix Cement Plaster By Shri Padmavati Agencies

Ready Mix cement PlasterApplication areas- Brick- Stone Walls- AAC Block/ Concrete Block- Concrete SurfaceComparisonParameters                          Ready Mix Cement Plaster                           Conventional MethodApplication Time                Fast Application                                             Not possibleQuality                                 Consistent quality due to computerized     Manual mixing hence not possible                                              mixing and tested raw material                  to test every batchSrinkage Cracks                  No shrinkage cracks                                      Significantly high shrinkage cracksHandling & Storage            Easy handling and storage                           Difficult to keep stock of                                                                                                                      different componentsWastage                               No wastage                                                     High wastagePreparation & Installation- The application surface should be rigid and free from oil, grease, paint, loose plaster or any other dirt particles.- Dampen the wall before application of plaster- Pour 6-7 liters of portable water in a clean container and the add 1 bag (40 kg) of Ready Mix.- It can be mixed by hand. Use of mechanical mixer or electrical stirrer is recommended for better results.- Mixing should be done for 5-10 minutes depending upon the speed of the mixing equipment.- Leave the mix to slake for 5-10 min and remix before use.- The mixture should be applied within one hour of preparation. If the concrete surface is smooth and dense. It's recommended that the surface is made rough for    better sticking of the plaster layer.- In normal weather, doesn't need watering for the first 24 hours. After the plaster is completely dry, curing should be done 2-3 times for 2-3 days. In abnormal weather conditions, curing for 5-7 days is required.Technical SpecificationParameter                                             Ready Mix PlasterAppearance                                           Greyish Granular PowderMain Binder                                          Portland CementAggregate                                              Graded sand & other industrial grade mineralAdditives                                               Strength inducing polymers & water retaining chemicalsMaximum Aggregate size                    Less than 1.5 mmBulk Density                                          1.2- 1.6 Kg/litre unitCompressive Strength (mpa)               More than 4 in 28 daysCoverage                                               15-20 sqft / 40 kg bag (for 10-12mm thickness)Thickness of Layer                               6- 12 mmPot Life                                                  1 - 2 hoursProportion of Water (%)                      17- 19% as per weightAvailable BrandMAGICRETE