Real Time Power Factor Correction Panel By Omada Engineers

We are manufacturing and supplying a valuable assortment of Real Time Power Factor Correction Panel in Faridabad, Haryana, India. These are made out with optimum grade raw material and advanced techniques under the strict guidance of trained professionals as per the set industry standards. We provide this range of product a very feasible prices.

a) The thyristor switched contactor shall be capable of handling the continuous current of 130% of the rated
capacitor current at rated voltage of 415V. The blocking voltage of the thyristor switch during off Condition should
be minimum 1800 Volt peak. Every thyristor switch should be capable of handling the dv/dt of 2000 Volts/ S.
b) The thyristor switched contactor used shall turn on at zero differential voltage across it. This zero
differential voltage tolerance shall not exceed 6 Volts peak value around zero.
c) The time delay between turn off and subsequent turn on should be as minimum as possible and in
the range of milliseconds. There should not be any discharge devices across capacitor that can exceed the watt loss of more than 30 watt.