Recycling Used Plastic Pp Pe Film Agglomerator Densifier, Impact Machine

Owing to our vast experience and knowledge of this domain, we are engaged in manufacturing and exporting a broad range of Recycling Used Plastic PP PE Film Agglomerator Densifier, Impact Machine in Nantong, Jiangsu, China.

Application : PP PE film, fiber etc.
Screw Design : 6+2, Fixed and rotational blades.
Approximate capacity : 100-800kg/h.
Warranty : 12 months.

Agglomerator machine using friction heat principle, make thermoplastic films direct crushing and granulation.

The Plastic agglomerator is used for granulating waste thermoplastic thin films with wall thickness less than 2 mm. such as, A high and low density polyethylene, polypropylene(PP) and polystyrene(PS), usually, the customer usually use it for the recycled film material, after crushing washing drying, the recycled PP/PE film scrap still contains 5-20% moisture, which will cause big problem for the next procedure of extruding, at the same time, the recycled film scrap takes relatively large space, so it's better that we can have a machine which can reduce the size of recycled scrap and evaporate the moisture, that's why the agglomerator comes.

Working principle for agglomerator machine :
Putting waste products into agglomerator pot body and quickly cutting by the high speed rotating and A fixed blade shear.

The material turning up and down by paddle and from all around to move towards to the center of the pot body.

The friction of material A and pot wall and blades A produce much friction heat under the high speed, making the materials temperature rises to the half-plastic A condition and connects to small lump.

Before the materials will block, put A preparation quantitative water spraying A to material.
The cold water touch the hot materials will gasify and take out the surface heat soon , making the surface of the materials cool quickly and avoid blocking, then after crushing effect between rotary blade and fixed blade to cut into particles(irregular size materials). During the crushing, Also may join the appropriate color pigments according to needs.

Technical parameter :
Model : Volume(L) : Effective : Motor : Mainshaft : Capacity : Heating : Discharge
Volume(L) : Power(KW) : Speed(rpm) : (kg/h) : Method : Method
ZL-100 : 100 : 75 : 30 : 800 : 80-100 : By self frictionManually or Pneumatic
ZL-200 : 200 : 150 : 45 : 800 : 150-200
ZL-300 : 300 : 225 : 75 : 800 : 250-300
ZL-500 : 500 : 375 : 90 : 750 : 450-500
ZL-800 : 800 : 600 : 132 : 750 : 750-800