Road Traffic Signal Controller

Our company is interested in the manufacturing and supplying a marvelous quality of Road Traffic Signal Controller in Mumbai, Maharashtra, India.

Salient Features:-
1- Auto / Manual Mode Operations
System can be placed on a Manual modea operation as and when desired by the Traffic Police. This mode enable the Police to control the traffic according to the traffic volume at that point of time.

2- Flash Mode Operation
System can be put in to a Flash Modea operation whenever is needed by activating the switch provided on the Police Panel. Provision has been given to activate the Flash mode from Keyboard while in programming mode

3- Hurry Call
8 a Hurry Calla plans can be programmed. By activating hurry call all running signal will be switched to Amber for 4 seconds and then to Red Signal except for the activated Hurry plan.
Running time duration can be set for each hurry call. Any signal plan except 1 & 2 can be configured as Hurry Call. Amber plan will run after completion of each Hurry Call.

4- All Red plan
a All Red Plana is executed following Power ON of the System to clear the intersection before starting a green signal. Default time duration for a All Red Plana is 04 seconds. This can be increased up to 99 seconds as desired by the user.

5- Amber plan
Amber Plan is used to enter the Amber outputs when system will be activated in manual mode; the Signal Plan consisting of Amber output will be automatically changed to the next Signal Plan after running predefined time , 16 entries are possible in this plan.

6- Line Test Plan
This plan is used to test the physical connection of the output from CPU to the output lamp through driver card

7- LCD display
Hand-held LCD display is provided for programming of the parameters & monitoring online status of the System.

8- Total freedom of programming
There are no fixed outputs configured by default for any particular signal outputs. The user can assign any output numbers to his convenient.

9- Time Synchronization and Data restoration
In case of power failure or restart of the system data will be restored and signal plan timing will adjusted according to the real time.

10- Erase Plan
User can erase saved data of individual plans or all plans together

11- Flash operation while in Programming Mode:
To prevent the system from complete halt while in programming mode, user can switch the system into flash mode operation while programing.

12- Police Panel
Police panel is provided to allow the Traffic Police to disable the auto mode operation and operate the system in manual mode.