Servo Voltage Stabilizer By Power Solutions

Servo Voltage StabilizerWe offer a wide range of Servo Voltage Stabilizer.Description We generally observe that, AC main supply is never 230 Volt or 415 Volt, but varies from 150 Volt-300 Volt and 300 Volt-500 Volt. It's a very common phenomenon, in India as well as most of the developing countries. The difficulties caused by them are well known, such as Over Load Condition, Line Losses, Poor Power Factor and several other reasons. Generally constant voltage which is required to load is never constant, but in fluctuation manner. It is observed that during the day time, the voltage is quiet low and during the night the Voltage is high then the normal. This fluctuation in supply system results frequent breakdown, low production and also loss of energy. Now the power agencies insist the consumer to fix the capacitor to improve power factor and we get better results in power saving. But Voltage is also important factor to save the power loss. Technical institute and other aspects that illumination (Lighting) is working very efficiently at 220 V AC with minimum power consumption and longer life. TECHNICAL SPECIFICATIONS RATING                                                                                                   as Per Requirements INPUT VOLTAGE                                                                                     170V-290V for Single Phase                                                                                                                   300V- 500V, for Three Phase OUT PUT VOLTAGE                                                                                220V/230V/240V Single Phase (adjustable)                                                                                                                   380V/415V/440V Three Phase (adjustable) REGULATION                                                                                          +/- 1% better TYPE                                                                                                        OUTDOOR (Oil Cooled) COOLING                                                                                                Oil Cooled/Air Cooled TEMP.RISE (MAX)                                                                                  60 Deg. Co above ambient. MOUNTING                                                                                            Wheels 90 Deg. DUTY CYCLE                                                                                            100 % CONTINUOUS EFFICIENCY                                                                                             97 % Approx. RATE OF CORRECTION                                                                          Better than 60V / Sec in Air Cooled Model RESPONSE TIME                                                                                     Less than 100 milliseconds OVERLOAD CAPABILITY                                                                       10 Minutes for 25% Extra of the Load. NO LOAD LOSSES                                                                                  less than 0.8 % over entire range EARTHING                                                                                              Earthing Terminals provided Metering                                                                                                Volt Meter 96 Size (L&T/Rishab)   SPECIAL FEATURES OPTIONAL   Protection Over Voltage, Under Voltage, Phase Failure, Neutral Failure with Time Delay for Both Side. Fully Solid State IC Control circuit. No effect of load power factor. No waveform distortion. High Efficiency. Auto / Manual operation facility... Cable entry box at Input and Output terminals MCB on Main Side (Schneider) Duly Painted with Putty & Primer for long life (Color As per requirement) Earth stud facility