Sika Multigard Application: Commercial & Household

Sika Multigard
Sika Multigard is a solvent free, water based, 2 - comp. Epoxy band
protective coating. It provide long lasting protection for wall against
damp partches.Uses
It can be applied on concrete, stone, plaster, rendering etc.Advantages




Protect from water seepageResistant to oil and greaseWeather proofMold dew resistantNo solvent, no fir hazardNon-toxicBreathing our characteristic allowing entrapped moisture to breatheEasy to apply with brush or rollerNo sagging in vertical applicationUniversal Stainer can be added to make the product coloured.
Instruction for Use
Substrate preparation: The substrate should be free from
grease, oil and loosely adhering particles. Clean the surface with wire
brush or emery paper.Mixing: Sika Multigard is supplied in pre-packed component
system. Stir component A and component B well seperately. Add comp. B
into comp. A and mix with a spatulla till it become homogeneous. To
make it coloured (if required), now add Universal Stainer and mix well
to get uniform colour.ApplicationMoisten then prepared surface well before application of Sika
Multigard. Apply the material by brush or roller within 30 minutes of
mixing.Minimum permitted substrate temperature 8CImportant RecommendationSensitive to rain upto 8 hrs. (30C) after applicationRecoatable after 5 hours at 30CUse two coats.Cleaning: Clean all the tools with lukewarm water immediately after use.
Coverage
Around 0.10 - 0.15kg/m2 per coat, depending upon the surface.