Sinter Crusher

Sinter CrusherSpecially designed Single Roll Crushers are used as Sinte Crushers for primary crushing in the iron and steel industry. Double Roll Crushers are particularly suitable for secondary crushing. Furthermore, they ensure a restricted range of particle size distribution with only a small proportion of tines.Feed MaterialsLumps of hot and cold sinter or primary crushed sinter in sintering plants.Mode of OperationThe sinter cake of various sizes that are dependent on the sinter belt's width, is fed into the crusher via a feeding table while it is either still hot or already cooled. It is then primary crushed by the crushing teeth on the grizzly bar, For secondary crushing the cooled sinter is fed into the Double Roll Crusher by vibrating feeders while it is distributed over the whole width of the roll. The roll's diameter, the tooth configuration and the circumferential speed are carefully adjusted to the type and the size of sinter in relation to the desired product size. One of the two crushing rolls is desinged as a loose roll in order to influence the product size by adjusting the gap width and to compensate wear and tear.AdvantagesConsistently high capacityHigh availability long lifetime of componentsSimple replacement of wear and spare partsLow proportion of fines gentle crushing methodSpecial FeaturesThe Primary Sinter Crusher is fitted with a directly driven crushing roll with strong crushing teeth, a movable grizzly bar carrier and a housing with an integral mobile frame to facilitate maintenance.The feeding table, the crushing tools and bars are protected against wear by hard facing. The crushing roll is arranged onto the machine's base frame. The crusher shaft made of high-grade steel is arranged in amply dimensioned spherical roller bearings. The bearing housings are equipped with lubricated labyrinths to avoid dust and dirt penetration. The crushing roll is electro mechanically driven via electric motor, couplings and gears or it is electrohydraulically driven.The Double Roll Crusher's individually -driven crushing rolls consist of roller bodies, equipped with crushing rings or shells made out of highly wear-resistant special cast. The crushing roll shafts are arranged in strong steel cast housings with lubricated. amplydimensioned spherical roller bearings with low maintenance requirements. The crushing rolls are driven by electric motors with coupling and gears via V-belt. The base frame is equipped with a positioning device to facilitate maintenance.