Slitting Line By Ferro Industries

Slitting Line

Slitting Lines from FERRO INDUSTRIES are highly productive and are of State of Art for precision slitting of coil metal.Our Slitting Lines are designed to slit all types of thin gauge strips to extremely close  tolerances. These lines basically consist of Coil handling, Strip processing and Scrap management equipment.

Our Slitting Lines come in a Singe loop, Double loop and Pull through configurations
Capacities extend from strip thickness of 0.1mm to 14mm
Strip widths of 200 m to 2000 mm and coil weight from 1 tonne to 30 tonnes.
Technically  what one could expect the unique concept of precision alignment  and adjustment of arbours together with high precision roller bearings  they rotate on .This did not come naturally at one go but took a lot of experimenting, traveling, upgrading and  risks to make this concept trouble free and the best.Characteristics and Features of Our Slitting Lines

Automatic Strip Threading
Minimum Burr on strip
High running accuracy of knife at arbours
Constant parallel distance between the last deflector roll and recoiler drum
Straight edged recoiling
Capacity to run up to 100mts/min
Economic efficiency due to high automation level
AimThe principle aim of Ferro Industries is to provide the metal working industry with the best machinery available at the   lowest cost.Product List




S.NO.
WIDTH
THICKNESS RANGE
COIL WEIGHT
MATERIAL
TYPE


1
200 mm
0.3 to 3 mm
Up to 2 Tonnes
Cold Rolled Mild Steel, Aluminum, Copper, Brass, etc.
Single or Double Loop system


2
500 mm
0.3 to 6 mm
Up to 7.5 Tonnes
Cold Rolled Mild Steel, Aluminum, Copper, Brass, etc.
Single or Double Loop system


3
1250 mm
0.3 to 6 mm
10 Tonnes
Cold Rolled Mild Steel, Aluminum, etc.
Single or Double Loop system


4
1500 mm
0.3 to 6 mm
20 Tonnes
Cold Rolled Mild Steel
Single or Double Loop system


5
2000 mm
0.3 to 6 mm
30 Tonnes
Cold Rolled Mild Steel
Single or Double Loop system


6
2000 mm
3 mm to 12 mm
30 Tonnes
Hot Rolled Mild Steel
Single or Double Loop system