Stainless Steel Dynamic Pass Box By Airomax Airborne Llp

DYNAMIC PASS BOX is a barrier between two areas with different sterility. It allows material transfer between areas with different sterility without cross contamination of air. To separate the areas Dynamic Pass Box uses High Chamber pressure and techniques of door interlocking. They are utilized for aseptic transfer of materials into and out from the critical process environments.

Dynamic Pass Box assists in transfer of materials driven through a controlled environment but without much personnel movement. Furthermore, this box helps in prevention of contaminants entrance either in the clean room or between various classified areas.

Dynamic pass box need to be installed between two different classified area/rooms for material pass through. The purpose is to provide barrier between areas & to sweep away the particulate load if pres-ent on surface of object being transferred to more clean area. The basic purpose of this equipment/ system is to provide ISO Class 5 (Class 100) Air flow in the workspace. The units are designed to deliver air in the Vertical a Recirculating system.

Key Features and Specifications
- Electromagnetic Door Interlocking System
- Vertical Down Flow (Recirculated)
- MOC as SS 304, SS 316 or SS 316L
- 90 FPM Velocity at 150 mm From HEPA Filter Face, (0.45 m/s)
- 0.3 micron Minipleat Box Type H14 Grade HEPA Filter with Efficiency 99.999%
- 10 micron Flange Type EU4 Grade HEPA Filter with Efficiency 90%
- Analog Type Differential Pressure Gauge with Range: 0 to 25 mm of WC
- Motor Blower Single Inlet or Double Inlet Centrifugal Type
- Speed Variable to adjust the speed of Blower
- Feather Touch Display Each Side
- 300 LUX - Fluorescent Illumination LED Light
- UV Light for Disinfection
- Process Lock Timer (Inbuilt)
- Door Open/Close Delay Alarm (Inbuilt)
- UV Hour Meter (Inbuilt)
- Power Supply 220-240V, 50 Hz, Single Phase

Construction
- Doubled Skin Cabinet with Doors and Toughened Glass
- Easy to Clean and to disinfect, Design according to GMP Guidelines and EN ISO 14644 Compliance
- No Sharp Edges and Pencil Coving for Internal Working Area, Sturdy Built Doubled Skin Body with Advanced airtightness
- Recirculatory Planum on Both Sides
- Less than 65 dB Sound Level on scale
- Minimum Vibration Level
- 30 MM Double Skin Doors with View Panel
- 5 MM Toughened Glass as View Panel
- SS 304 Door Hinges and Door Handles
- SS 304 DOP/PAO Test Port (For HEPA Filter Testing) and Atmospheric Nozzle

Mounting
- Wall Mounting
- Stand Mounting
- Floor Mounting

Documentation
- Design Qualification
- Installation Qualification
- Operational Qualification

Certificates
- Calibration Certificate for Differential Pressure Gauge
- Test Certificate for Motor Blower
- Test Certificate for HEPA Filter and Pre Filter
- Test Certificate for Controller
- M.O.C. Certificate (Material of Construction)
- Other Required Certificates and Drawings

Optional Features & Accessories
- Flame Proof Design & Construction
- Three or L Type Construction
- Support Stand for Pass Box Mounting
- UV Hour Meter (External)
- Digital Differential Pressure Gauge with Alarm Hour Meter
- Extra UV Light and Fluorescent LED Light
- Rollers at Bottom

Performance Validation at Site
- Velocity Measurement
- HEPA Filter Leak Test
- Particle Counting
- Air Flow Pattern Test
- Recovery Test

Areas of Application
- Pharmaceutical Industries
- Hospitals and Medial
- Microbiology Laboratories
- Chemical Research Laboratories
- Food Processing Industries
- Electronics Industries