P { margin-bottom: 0.21cm; } We are one of the leading manufacturers, suppliers and exporters of a wide range of Strip Packing Foils. These foils are...View Product Details
Product Overview
Key Features
P { margin-bottom: 0.21cm; } We are one of the leading manufacturers, suppliers and exporters of a wide range of Strip Packing Foils. These foils are manufactured using high quality raw material, which is procured from authentic vendors of the market. It is highly appreciated in the market for its lightweight, high quality and resistance against chemicals and moisture. Strip Packing Foils are widely used for packing medicines, tablets, capsules and many more. We also check all the foils on various parameters to ensure flawlessness. Other information:Foil MaterialSoft fully annealed aluminium alloy AA 8011 confirming to Aluminium Association specification. Std. Foil GaugeOptions Tolerance(+/- 8%) Min. BurstingStrength 0.025 mm +/- 0.0020 mm 1.5 kg/sq. cm 0.030 mm +/- 0.0024 mm 1.9 kg/sq. cm 0.040 mm +/- 0.0032 mm 2.5 kg/sq. cm SealantColourless LDPE Confirming to the applicable Government regulations regarding direct contact with medicines and drugs. Standard PolymerGauge Options NominalGSM Tolerance(+/- 15%) GSM 150 34.39 +/- 5.17 180 41.27 +/- 6.21 200 45.85 +/- 6.90 Density of LDPE: 0.917 g/cc. Peel Strength of Lamination: 200 g/15 mm min. Seal Strength Betweent Top & Bottom Foil: 450 g/15 mm min. Printing & Lacquer CoatingPrinted as per text, layout and shade approved by customer. For non-printed specification, clear lacquer to be coated as a protective coating and good printability. Printing inks and lacquer coatings are capable to withstand 180 deg. C for 1 sec. dwell time. ConfigurationPrinted and Unprinted Pharma Foils are available in the reel forms. Unprinted pharma foils are also available as Jumbo roll. Winding DirectionGenerally - printed or clear lacquer side is out in the finished reel. CoreMaterial Options: (a) Plastic (b) Aluminium (c) Card board. Core ID: 76 mm +/- 0.5mm. The length of the core is equal to the width of the web. Splices: Butt type made with 25mm pressure sensitive tape. Reel Outer Diameter: 250 +/- 10 mm for slit material 400 +/- 10 mm for Jumbos. Reel Wander: Within +/- 1 mm. Reel/Web WidthPlain: 45mm to 900mm with a tolerance of +/- 0.5mm Printed : 45mm to 600 mm with a tolerance of +/- 0.5 mmJoints Per Reel: Maximum 2 Average less than 1.Pin Holes: Nil.IdentificationsEach reel shall be identified with a sticker with Reel number, Specification, Net weight, Gross weight, Operator name & Date of manufacture.PackingPharma foils are packed in cardboard carton.Relevant markings are provided in each outer package.Recommended Operating Conditions Sealing temperature 130 to 150 deg. C Sealing pressure 2.8 to 5.6 Kg/sq. cm or 40 to 80 lbs/sq. inch Dwell time 0.25 to 0.5 sec. Covering Area of 1 Kg Finished Material (Nominal) Gauge & Temper of Foil Covering area in Sq.mts/Kg with 150Gauge polyethylene lamination 0.025 (soft) 9.78 0.03 (soft) 8.64 0.04 (soft) 7.00 Table Showing Thickness Tolerances of Foil Foil Gauge Thickness (mm) GSM Min.(-80%) Nominal Max.(+8%) Min.(-8%) Nominal Max.(+8%) 0.025 mm 0.023 0.025 0.027 62.33 67.75 73.17 0.030 mm 0.028 0.030 0.032 74.80 81.30 87.80 0.040 mm 0.037 0.040 0.043 99.73 108.4 117.07 Table Showing Thickness Tolerances of Polyethylene Poly Gauge Thickness (mm) GSM Min.(-10%) Nominal Max.(+10%) Min.(-10%) Nominal Max.(+10%) 150 0.0338 0.0375 0.0413 29.22 34.39 39.56 180 0.0405 0.045 0.0495 35.06 41.27 47.48 200 0.045 0.05 0.055 38.95 45.85 52.75 Technical Specifications Density Of Ldpe 0.917 g/cc Peel Strength OfLamination: 200 g/15 mm min. Seal Strength Bet. Top & Bottom Foil: 450 g/15 mm min. Printing And LacquerCoating: Printed as per text, layout and approved by the Customer. For non-printed specification, clear Lacquer to be coated as a protective coating and good printability. Printing inks and lacquer coatings are capable to withstand 180 deg. C for 1 sec. dwell time. Configuration: Printed and Unprinted Pharma Foils are available in the reel forms. Unprinted pharma foils are also available as Jumbo roll. Winding Direction: Generally, printed or clear lacquer side is out in the finished reel. Core: Material options (a) Plastic (b) Aluminium (c) Card BoardCORE ID: 76 mm +/- 0.5 mm. The length of the core is equal to the width of the web. Splices: Butt type made with 25 mm pressure sensitive tape. Reel Outer Diameter: 250 +/- 10 mm for slit material. 400 +/- 10 for Jumbos. Reel Wander: Within +/- 1 mm Reel/Web Width: Plain : 45 mm to 800 mm with a tolerance of +/- 0.5 mm.Printed: 45 mm to 600 mm with a tolerance of +/- 0.5 mm. Joints Per Reel: Maximum 2. Average less than 1. Pin Holes: Nil. Test CertificatesTest certificates giving the actual observed values of different parameters will accompany.
Company Details
RAVIRAJ FOILS LIMITED, Established in 1997 at Sanand in Gujarat, is a leading Exporter,Manufacturer,Supplier of Aluminium & Foils in India. RAVIRAJ FOILS LIMITED is one of Trade India's verified and trusted sellers of listed products. With extensive experience in supplying and trading Strip Packing Foils, RAVIRAJ FOILS LIMITED has made a reputed name for itself in the market with high-quality Alu Alu Foil, Aluminium Foil, Aluminium Strip Foil, etc. Focusing on a customer-centric approach, RAVIRAJ FOILS LIMITED has a pan-India presence and caters to a huge consumer base throughout the country. Buy Aluminium & Foils in bulk from RAVIRAJ FOILS LIMITED at Trade India quality-assured products.