Tdr Cable Fault Locator (Ri-407)

We are engaged in manufacturing excellent quality TDR Cable Fault Locator RI-407 in Saint Petersburg, Sankt-Peterburg, Russia.

Application Area
RI-407 is intended for the following measurements on balanced and unbalanced cables:
a c cable length measurement and cable continuity tests;
a c measurement of the distance to the heterogeneity of the cable impedance or low-resistance fault, using the pulse (TDR) method;
a c measurement of the distance to the high-resistance fault, using the Arc Reflection Method (ARM) in complex with the high-voltage pulse generator (HVPG);
a c measurement of the distance to the high resistivity fault, using the Impulse Current Method (ICM) or Decay Method in complex with the high-voltage pulse generator (HVPG);
a c measurement of the velocity factor of the line at a known length;
a c determination of faulta s nature;
a c recording into internal storage and playback of at least 300 waveforms for subsequent processing in stationary conditions;

Specifications and Characteristics
Implemented TDR, ARM, ICM and Decay methods
i . Display - color 10.4" TFT with a resolution of 640 x 480 pixels
i . Range 1 m...256 km
Measurement relative error A 0.01%...A 0.2% of the sub-range value
Probing pulse width 10 ns ...100us
Probing pulse amplitude 10 V, 90V (open circuit)
Receiver sensitivity: 10 mV
Asynchronous noise suppression: averaging 1 to 64
Non-volatile memory capacity: 300 waveforms
Data exchange: via USB-Flash
Input impedance: 75 ohm
Power: Li-Ion battery (7,2 A 0,7)V