Transmitter/transducer

These Electric Transmitter/Transducer is a device which converts the measured electric parameters (current, voltage, power, frequency factor etc.) into isolated DC current, DC voltage or digital signal. They are widely used in utility and industry field;

Technical Specifications of Transmitter/Transducer :-
Accuracy 0.5, 0.2 class
Input Nominal value Current ACa DC1Aa DC5Aa DC20mAi voltageACa DC100Va DC300Va DC500Va DC75mV
Overload Continuancei 1.2 timesi instantaneousi current 10 times(5s)i voltage 2 times(10s)
Consumption Current inputa 0.3VAi voltage inputa 0.3VA(When 100V)i a 0.6VA(When 300V)i a 1VA(When 500V)
Output Frequency 50/60A 5Hz
Norminal value 4-20mAa 0-20mA, 0-5V, 0-10V and so on
Load resistance When current outputa 600IC, when voltage outputa Y1000
Ripple content <0.5% peak value
Response time a 400ms
Power supply Voltage AC110/220VA 15%a ACa DC85~270V
Power Consumption AC current, voltage a 3VA, power a 4VA
Insulation resistance a Y100MIC
Isolation with stand strength Among input / output / power supply 2.0kV/1min, 50Hz
Temperature modulus a 100ppm/a
Ambient Temperature Work: -10~+55a Storage: -25~+70a
Humidity a 90%RH, In the place without dew and corrosive gas
Altitude a 2000m
Install action mode DIN Rail, or fix to cabinet with bolt