Vitrified Tiles Supplier India

It is used in - - Satellite - Cup-saucers - Vehicle-set - Bon-china - Tiles - Medical equipments - Electricity - Rifle making industry - Sanitary ware Technical Specification for Vitrified Tiles             Technical Parameters ASTM CEN ISO INT. STD City Vitrified Deviation in length / width C 499 EN 98 10545-2 0.5% 0.05% Deviation in thickness C 499 EN 98 10545-2 5.0% 3% Straightness of side - EN 98 10545-2 0.5% 0.1% Rectangularity - EN 98 10545-2 0.6% 0.2% Surface flatness C 485 EN 98 10545-2 0.5% 0.2% Water absorption C 373 EN 99 10545-3 0.5% 0.04% Scratch hardness (Moh's) C 849 EN 101 - 6 7 Modulus of Rupture (N/mm2) C 648 EN 100 10545-4 27 45 Breaking strength (N) C 648 - - 1113 N > 2800 N Skid resistance C 1028 - DIN 51130 > 0.4 > 0.4 Abrasion resistance (mm3) - EN 102 10545-6 205 < 144 Linear thermal expansion(/C) C 372 EN 103 10545-8 6.4 x 10-6 6.4 x 10-6 Thermal shock resistance C 484 EN 104 10545-9 No Damage No Damage Colour resistance to light DIN 51094 - 10545-16 No Change No Change Glossiness - - - - 70 - 85 Chemical resistance (Except HF) C 650 EN 106 10545-13 No Damage No Damage Density (gm/cc) DIN 51082 2.4 Frost Resistance - - 10545-12 Frost Proof Frost Proof Decorative Faults - - 10545-2 Defect Free Defect Free Surface Quality - - 10545-2 95% Defect Free > 95% Impact Resistance - - - Good Good Crazing Resistance - - 10545-11 No Crazing No Crazing Resistance to house hold chemicals - - 10545-13 No Visible Effect No Visible Effect                           Technical Specification for Floor Tiles             Characteristics IS : 13755Requirements GenSpecification Enitiblla City Norms   DIMENSIONS & SURFACE QUALITY A) Deviation in length 0.5% 0.3% B) Deviation in thickness 0.5% 0.5% C) Squareness 0.5% 0.3% D) Straightness of side 0.5% 0.3% E) Surface flatness 0.5% 0.3% F) Surface quality Min. 95% of tiles should befree from defect > 95% G) Deviation in width 0.5% 0.3%   PHYSICAL PROPERTIES A) % Water Absorption C 372 Below < 4% B) Modulus of Rupture / Bending Strength C 484 300 kg / cm2 C) Scratch Resistance (Moh's Scale) DIN 51094 Min. 5 D) Resistance of surface Abrasion - Depend on Series E) Crazing Resistance C 650 Min 5 Cycle Please read the following Instructions before Laying the Tiles 1. Variation in shade, colour & pattern is natural features of ceramics, therefore we advised you to purchase sufficient tiles at one time to complete the job. 2. First of all, before opening the boxes of tiles, please check manufacturing date, design name, colour tone and batch. We advise use the material having same batch and same date in a single room. 3. Please check the level of prepared bed. 4. Slope should be given on the surface on which tiles are to be fixed for water preparing flow at the time of mortar bed, The mortar bed or surface on which tiles are to be fixed should be fine, smooth, dirt free & dust free to avoid contamination. 5. Ceramic / Vitrified tiles have inherent property of colour variation. So before laying please follow the instruction as below. a. First of all, lay the tiles in room without applying cement mortar and observe the tiles for colour tone & if some tiles does not match with others for colour or size, Please lay all tiles in such a way that arrow behind the tiles or symbol of tiles should remain in one direction in whole room. b. Please lay all the tiles in such a way that "arrow behind the tiles" or "symbol of tiles" should remain in one direction in whole room. c. Before laying the Stonela Series Tiles please Check that back side of the tiles symbol be in a same direction. d. To add beauty on the laid surface, a gap of 3 to 4 mm spacers can be kept between two tiles. e. Please fillup the joints between 2 tiles after 24 hours of laying f. After finishing the joint filling wipe out of excess grout with a damp sponge and polish the tiles with a soft wand dry cloth for a clean surface. The tiles can also be clean by mild acid. 6. Allow 3 to 4 days for bed drying 7. Before doing cement or furniture work on laid tiles, we advise to use plain plastic(without printed) with POP coating on it 8. We appreciate your suggestions & views regarding the design, shade & colour of tiles 9. Good suggestion & customer satisfaction will helpful to use making your home flooring a thing of beauty & pride. 10. Company cannot entertain any complain afte4r laying the tiles.