Unikote-1000

Unikote-1000


Unikote is a Corrosion Preventive
resin based coating in liquid form. When Unikote 1000 is applied on
Surface it penetrates inside every microscopic cracks and crevices
due to its Ultra high Surface attraction after some time Solvent part
of liquid evaporates living a film, this film provides excellent log
term corrosion protection on metal surface, Excellent adhesion
property of Unikote 1000 does not allow corrosion to spread further
to nearby areas.

Unikote 1000 does not allow dirt, dust,
Fungus, Mug or any other deposit.

ADVANTAGES.

Unikote 1000 Single component and ready
to apply coating
Unikote 1000 is resistant to salts
oxidizing agent moisture and fungus growth.
Unikote 1000 can be used as primer
before panting it does not react with paint hence surface can be
coated with any paint color.
Unikote 1000 is available in a wide
range of shades.
Unikote 1000 has excellent adhesion
property to surface of metal.
Unikote 1000 is non toxic and hence can
be used on potable water tank.







APPLICATION AREAS

Storage tanks
Reactors Vessel
Cooling Towers
Mixers
Pipelines
Acid, Alkali, Chemical Pharmaceutical
and refineries
Vehicle Under coating offshore
structures instruments, tools
Drilling rigs and any part which
requires long term protection from corrosion













Black


Grey/Yellow/Red/Smoke/Grey & other shades




Film Thickness





25-30microns one coat 45-50 micronstwo coat



33-35 microns one coat
65-70 microns two coat








Temperature Withstanding Capacity



10OC to 15oC


10OC to 15OC





Drying properties

Tack Free time after application.
Complete Curing.





01 hour
7 days




1.5 hour
7 days






Viscosity by B + cup@ 30OC (sec)



25-3



40-80





Specific gravity



0.86+/ -0.02



0.96+ / -0.02





Shelf life
(months)




12



12







Salt Spray Test 5% Na CI as per ASTM B 117-85



500 Hours



500 Hours





Resistant to Acid/Alkali



Passes as per IS 2932-74



Passes as per IS 2932-74





Resistance to Impact



> 27 N/M2


> 27 N/M2






Coverage single Coat sq.Ft./Lt. Spray Brush Dip



150-180
120-140




80-90
70-80






Flash pointO C



84



50





Volatile %



50



50



SURFACE PREPARATION.

Surface preparation is the most
important step PHOSPHATING or SAND BLASTING is the ideal surface
preparation method. In case these processes are not possible surface
preparation should be done by thorough cleaning.

PACKING AVAILABLE.

5 Lit 20 lit. 50 lit, 100 lit. 205 Lit.

SHADES AVAILABLE: GREY, SMOKE GREY,
RED, YELLOW, BLUE, GREEN, ALUMINUM.ETC.

DIRECTIONS FOR USE.

Stir well before use for better results
use spray method.
Apply one coat of Unirischter and two
coats of Unikote 1000 for best results ssecond coat to be applied
after tack free of first coat.