Acnet-622 Ethernet Can Adapter

The ACNET-622 Ethernet CAN Adapter connects a PC, a embedded PC or other general device to a CAN bus via the TCP/IP network protocol (Ethernet). The ACNET works as a device with no own CAN identifier on the bus. The ACNET includes ACNET -600(1 CAN port), ACNET -622(2 CAN ports) modules. The CAN messages are transparently embedded in TCP/IP telegrams to enable communication with any CAN device on the CAN network. 10/100 Mbps, auto MDI/MDIX
CAN Baudrate is from 2.5Kbps to 1Mbps, adjustable
CAN 2.0A and CAN 2.0B supported
Transmit speed is up to 3000 frame/sec, and Receive speed is up to 6000 frame/sec.
Multiple host controllers can receive/transmit CAN messages.
Listen mode, Recording of CAN message without CAN bus influences..
Up to 252 ACNET CAN connecting up to 252 CAN networks via LAN or internet.
3KV Galvanic isolation protection, 2.5KV Signal isolation protection.
DLL library and examples included Windows driver provided
TCP/UDP protocols changeable with software
Galvanic isolation between two buses(ACNET-622)
Industrial temperature range:from-25 to 75A C
MCU:High-speed 32bit ARM processor
Ethernet:Ethernet interface: RJ45 plug,10/100 Mbps, auto MDI/MDIX, 2KV isolation
Ethernet protocols support: ETHERNETa ARPa IPa ICMPa UDPa TCPa DHCPa DNS
configuration: Static or dynamic IP address (DHCP), configurable via PC tool.
CAN Specification:1/2 independent CAN communication ports ,
Signal Support:CANH1i CANL1i GND1,CANH2i CANL2i GND2
Connectors:10-pin connector
Optical Isolation:3000V