Canbridge-100 Series

These CANBridge-100 Series creates a connection between two High-speed CAN busses with galvanic isolation of up to 3 kV. Both CAN channels are decoupled from each other and from the power supply. CAN messages are forwarded 1:1 between the two channels and may be forwarded unidirectionally if required. With its DIN rail casing and extended temperature range support, this module is suitable for use in an industrial environment.CAN Baudrate is from 2.5Kbps to 1Mbps, adjustable
CAN 2.0A and CAN 2.0B supported
Transfer rate is up to 7K frame/sec.
Two independent CAN ports with Galvanic Isolation
3KV Galvanic isolation protection, 2.5KV Signal isolation protection.
Very easy to configure
Wide supply input range
Industrial temperature range:from-45 to 85A C
CAN Specification
Two independent CAN communication ports , Compliant with CAN 2.0A, CAN 2.0B, ISO/DIS 11898
Transfer Rate
From 5Kbps to 1Mbps, adjustable
Conversion efficiency
7000frame/sec., standard frame, 8 bytes data
Delay
1095 frame, i 100us
Termination Resistor
120 ohm, switchable for each CAN channel, at delivery activated
Signal Support
CANH1i CANL1i GND1,CANH2i CANL2i GND2
Connectors
10-pin connector
Optical Isolation
3000V DC-DC Isolationi 2500V Signal isolation
Configuration
Configuration through USB interface, automatic identification, no need to install the extra driver
Soft
CANBridge Config Tools configuration software
Power supply
+9Vi +30V DC
Standby power supply
Via USB
Power Consumption
12V@180mA